MVI56-PDPMV1 DP V1主通信模块 兼容 PROFIBUS 中继器

MVI56-PDPMV1   DP V1主通信模块  

MVI56-PDPMV1 具有一 （1） 个光隔离 RS485 端口，支持 PROFIBUS DP 版本 1 协议。多达 125 个 PROFIBUS 从设备可以连接到此端口，该端口也与 PPROFIBUS 中继器兼容。该模块能够配置多达 1536 个循环字节和 1536 字节的输出，并支持扩展诊断数据。
MVI56-PDPMV1 支持的其他功能包括报警处理、同步和冻结命令、支持 PROFIDrive 版本 3.1 参数读写操作、组播和广播报文。
MVI56-PDPMV1 具有嵌入式 LED 状态指示灯，用于描述模块的运行状态。这些 LED 指示灯包括就绪、运行、错误和令牌指示灯。
MVI56-PDPMV1 PROFIBUS 通信模块安装在 1756 ControlLogix 机箱上。它占用机箱的单个插槽，从背板吸收 800 mA @ 5VDC 和 3 mA @ 24VDC 的电流。它的工作温度为 0°C 至 60°C（32°F 至 140°F），存储温度为 -40°C 至 85°C（-40°F 至 185°F）。该模块必须安装在适当的外壳中，在 5 Hz 至 10 Hz 范围内振动不超过 150 g，在相对湿度为 30% 至 5% 的情况下，冲击为 95 g，非冷凝。
MVI56-PDPMV1 模块是单插槽模块，适合兼容 1756 背板。当连接到处理器时，它被识别为输入/输出模块。
此外，模块在处理器内存中移动，以便在处理器和模块之间传输数据。通常，该模块用作 PROFIBUS 网络扫描仪、PROFIBUS 设备的数据传输调解器以及通过背板传输的处理器数据存储器。
MVI56-PDPMV1 模块的环境条件包括 0 至 60 摄氏度（32 至 140 华氏度）的工作温度范围，存储温度范围为 -40 至 85 摄氏度（-40 至 185 华氏度），5G 抗振性从 10 到 150 赫兹，30G 抗冲击性（不运行时为 50G）和 5% 到 95% 相对环境湿度（非冷凝）。

备件咨询：何经理

Ph:+86 18059884797 （微信同号）

#Email: sales@xiongbagk.cn

#Main brands：ABB、Bently nevada，Triconex、Schneider PLC、GE Fanuc、 Emerson Ovation、Honeywell DCS、Rockwell ICS、Allen Bradley、Foxboro、NI、Motorola、HIMA、Prosoft，LAM，Woodward、MOOG、Kollmorgen…

MVI56-PDPMV1   DP V1主通信模块  

MVI56-PDPMV1 has one (1) optically isolated RS485 port and supports the PROFIBUS DP version 1 protocol. Up to 125 PROFIBUS slave devices can be connected to this port, which is also compatible with PPPROFIBUS relays. This module can configure up to 1536 loop bytes and 1536 byte outputs, and supports extended diagnostic data.
Other functions supported by MVI56-PDPMV1 include alarm processing, synchronization and freezing commands, support for PROFIDrive version 3.1 parameter read and write operations, multicast, and broadcast messages.
MVI56-PDPMV1 has embedded LED status indicators to describe the operating status of the module. These LED indicators include ready, running, error, and token indicators.
The MVI56-PDPMV1 PROFIBUS communication module is installed on the 1756 ControlLogix chassis. It occupies a single slot in the chassis and absorbs 800 mA @ 5VDC and 3 mA @ 24VDC currents from the backplane. Its operating temperature is 0 ° C to 60 ° C (32 ° F to 140 ° F), and its storage temperature is -40 ° C to 85 ° C (-40 ° F to 185 ° F). The module must be installed in a suitable enclosure, with a vibration not exceeding 150 g in the range of 5 Hz to 10 Hz, and an impact of 95 g at a relative humidity of 30% to 5%, non condensing.
The MVI56-PDPMV1 module is a single slot module that is compatible with the 1756 backplane. When connected to the processor, it is recognized as an input/output module.
In addition, the module moves within the processor memory to transfer data between the processor and the module. Typically, this module is used as a PROFIBUS network scanner, a data transmission mediator for PROFIBUS devices, and a processor data storage for transmission through the backplane.
The environmental conditions of the MVI56-PDPMV1 module include an operating temperature range of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit), a storage temperature range of -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit), 5G vibration resistance from 10 to 150 Hz, 30G impact resistance (50G when not in operation), and 5% to 95% relative environmental humidity (non condensing).
其他型号：

MVI56-PDPS
MVI56E-MCM
MVI56E MNET
5304-MBP PDPM
MVI56- PDPS
6104-WA-PDPM
MV169 PDPMV1
1452-25M
PTQ- PDPMV1
PLX32-EIP-SIE
4301-MBP-DFCM
PTQ-PDPMV1
AN-X2 AB-DHRIO
AN-X2 AB-DHRIO
I MVI56-MBP
1454-9F
MV156 MNETR
5301-MBP -DFCM
AN-X2-AB- DHRIO
RLX2-IHNF-A
RLX2-IHNF-A
PTQ-PDPMV1
PTQ-PDPMV1
MVI69L-MBS
MVI56E-MCM
MVI56-GSC
5601-RIO-MCM
MVI56-GSC
PMF1216D61