PR9376/010-011 转速测量传感器 固体气体受热时产生热膨胀的原理

EPRO膨胀式传感器原理:膨胀式温度传感器根据液体,固体气体受热时产生热膨胀的原理，这类温度传感器有液体膨胀式固体膨胀式和气体膨胀式。气体EPRO膨胀式传感器1.在有刻度的细玻璃管里充入液体(称为工作液如水银,酒精等)构成液体膨胀式温度计。常用的有水银玻璃温度计和电接式温度计,这种温度计远不能算传感器,它只能就地指示温度。电接点式温度计可对设定的某一温 度发出开关信号或进行位式控制，有固定式和可调式两种。
●用于静态和动态位移量的非接触式测量。
-轴向和径向轴位移
-轴偏心
- 轴振动
- 轴瓦的磨损
-油膜厚度
-裂纹检测
●多种型号满足各种工业要求
，符合多种通用标准， 例如: .
- API 670
. DIN 45670
- ISO 10817-1
●可在需要防爆的环境中使用，防爆等级可达到Eex ib IIC T6/T4。
●广泛应用于汽轮机监测保护系统MMS 3000和MMS 6000之中。


当前，主流的光学测距原理有两种：时间飞行与激光位移。二者互有优劣，根据其自身特点，有着明显的应用区别：

• 　ToF原理：远距离测量，远可达1500m，重复精度毫米级，适合远距离定位，广泛用于轨道、物流等行业。
• 　CMOS激光位移：近距离测量，小可达20mm以内，重复精度高可达0.01um，适合紧凑空间下的精细检测，广泛用于锂电、半导体、3C行业

　　结合市场需求，SICK推出了依据三角原理测距的光电传感器：PR9376/010-011   转速测量传感器将测距功能集成在光电体内，短可达15mm，远支持850mm。重复精度毫米级，适合锂电、包装及升降机等行业的距离控制。

IO-Link是一种独立于现场总线、开放式的点对点的通信，是适用于工业控制中底层的设备的工业通讯接口。被称为“自动化的后一米”。

　　一个完整的IO-Link系统,PR9376/010-011   转速测量传感器 通常包括多个IO-Link设备（包括IO-Link传感器，IO-Link集线器及标准I/O传感器等），通过标准电缆与IO-Link主站（如SIG200）相连。

• 　个全球标准化IO技术（IEC 61131-9）与传感器和执行器通信
• 　大电缆长度为20m
• 　提供典型的扫描周期 2.3ms
• 　允许访问大量传感器数据 ，能和现场总线连接

备件咨询：何经理

Ph:+86 18059884797 （微信同号）

#Email: sales@xiongbagk.cn

#Main brands：ABB、Bently nevada，Triconex、Schneider PLC、GE Fanuc、 Emerson Ovation、Honeywell DCS、Rockwell ICS、Allen Bradley、Foxboro、NI、Motorola、HIMA、Prosoft，LAM，Woodward、MOOG、Kollmorgen…

PR9376/010-011   转速测量传感器

The dual channel shaft displacement measurement module MMS6210 measures shaft movement, such as axial displacement, differential expansion, thermal expansion, and radial shaft position. The signal is taken from the eddy current displacement sensor.
The measurement of this module can be combined with the measurement of other modules to form a turbomachinery protection system, or provided as input to analysis and diagnosis systems, fieldbus systems, distributed control systems, power plants/main computers, networks such as WAN/LAN networks, Ethernet.
For steam engine, gas turbine, water turbine, compressor, fan, centrifuge and other turbine machinery. The use of this system can improve usage efficiency, operational safety, and extend the service life of machinery.
MMS6210 is a dual channel shaft displacement measurement module that can use eddy current displacement sensors to measure axial movement to monitor and protect various types of turbomachinery, such as steam turbines, gas turbines, compressors, fans, gearboxes, blowers, centrifuges, etc.
The output of the sensor, i.e. the input of the module, represents the gap between the front end of the sensor and the surface of the measured object. The signal is processed by the MMS6210 module and converted into a standard signal output in direct proportion to the set working mode. The other parts of the module provide functions such as alarm, sensor power supply, module power supply, channel and sensor detection, and signal filtering.
Built in microprocessor, it can set working mode and parameters, and read all measured values through on-site portable computer or remote communication bus.
The next start/stop process is stored in the module and can be displayed through a computer.

其他型号：

PR9376/010-011 
CON011 9200-00001
| PR6424/010-130+CON011
| PR6423/010-140+CON021
MMS3120/022-000
PR9268/300-000
MMS3120/022 -0009100-03047-01
MMS6823R 9100-00001-06
PR6423/010-000-CN+ CON021
PR6423
CON021/916-160
CON021
PR6424/003-030
CON021
PR6423/10R-030-CN
PR6423延长线
PR6423/002-030-CN+ CON021
PR6424/003-030+CON021
PR6424/003-030+CON021
| MMS6110
| MMS6210
PR6423/003-030-CN
PR9376/010-01 1
CON021
MMS3120/022-000
PR9376/20PR6423/010-010-CN
CON021/916-160