TRICONEX T8231 可信电源系统 设计用于转换110伏或240伏的主线电压

Trusted@电源系统是一 种高密度灵活的电源，设计用于转换110伏或240伏的主线电压。输出是24 Vdc的可信产品或28 Vdc可调的现场功率。可信电源系统由-个带机械支架的1U电源机箱组成，多可包含3个750w的电源包。Power Packs在配置中使用一个或多个Power shelf分担负载。每个电源包都有一个单独的电源连接，通过机械保留的IEC 60320型连接器。每个Power Shelf可提供2250w或1500w的单电源供电,支持n+ 1冗余。可以连接多个单元以满足进一 步的容量或冗余要求。Power Pack状态诊断信息通过Power Port提供， Power Port连接到Power Shelf的后面。该设备监控输入和输出条件，并使用继电器触点报告超出范围的故障和过温/风扇故障。电源端口还允许连接可选的机架式电源控制器进行实时配置， 输出电压和电流，监控4个电源架中多达12个电源组。
特点:
冗余配置和N+ 1配置。
●热可更换电源包。
●当前共享。
●电流限制。
●功率因数校正。
●诊断联系人。
●输出电压可配置。
●每个电源组的输入/输出故障诊断。

The Trusted @ power system is a high-density and flexible power supply designed to convert mainline voltages of 110 or 240 volts. The output is a reliable product with 24 Vdc or an adjustable on-site power of 28 Vdc. The trusted power system consists of a 1U power supply chassis with a mechanical bracket, which can contain up to three 750W power packs. Power Packs use one or more Power shelves to share the load in the configuration. Each power pack has a separate power connection through a mechanically retained IEC 60320 type connector. Each Power Shelf can provide a single power supply of 2250w or 1500w, supporting n+1 redundancy. Multiple units can be connected to meet further capacity or redundancy requirements. Power Pack status diagnostic information is provided through the Power Port, which is connected to the back of the Power Shelf. This device monitors input and output conditions and reports out of range faults and over temperature/fan faults using relay contacts. The power port also allows the connection of optional rack mounted power controllers for real-time configuration, output voltage and current, and monitoring up to 12 power packs in 4 power racks.
Features:
Redundant configuration and N+1 configuration.
● Hot replaceable power pack.
● Currently shared.
● Current limitation.
● Power factor correction.
● Diagnostic contact person.
The output voltage can be configured.
● Input/output fault diagnosis for each power pack.