triconex 9853-610 主板模块 保证模块在出现单个故障时正常运行

9853-610   主板模块

TRICONEX 9853-610任何通道上的任何诊断都会激活模块的故障指示器,进而激活模块的故障指示器激活机箱报警信号。故障指示器指向通道故障，而不是模块失败。保证模块在出现单个故障时正常运行，并且可以TRICONEX 9853-610继续正常运行,但存在一些多 个故障。模拟量输入模块包括热备盘功能，允许在线更换TRICONEX 9853-610故障模块。与所有I/0模块一 样,模拟量输入模块需要单独的现场端接带有电缆接口到Tricon控制器背板的组件。每个模块都是机械的键控可防止在配置的机箱中不正确安装。

Any diagnosis on any channel of TRICONEX 9853-610 will activate the module's fault indicator, which in turn activates the module's fault indicator and activates the chassis alarm signal. The fault indicator points to a channel fault, not a module failure. Ensure that the module operates normally in the event of a single fault and can continue to operate normally with the TRICONEX 9853-610, but there are some multiple faults. The analog input module includes a hot spare function that allows for online replacement of TRICONEX 9853-610 faulty modules. Like all I/O modules, analog input modules require separate on-site termination of components with cable interfaces to the Tricon controller backplane. Each module is mechanically keyed to prevent incorrect installation in the configured chassis.