4409型安全管理器模块(SMM) 用作Tricon控制器和霍尼韦尔通用控制网络(UCN) 之间的接口，UCN是三大网络TDC-3000分布式控制系统之一。 在霍尼韦尔系统上显示为UCN.上的安全节点SMMS,以络数据速率传输过程信息，以便在TDC-3000.上的任何地方使用。多发性骨髓瘤以霍尼韦尔携带者熟悉的显示格式将Tricon别名数据(包括系统变量)和诊断信息传输到操作员工作站。TDC-3000通过SMM提供以下功能: ●处理关键的I/0点并将结果传递给DCS ●处理Tricon警报并将其传播到用户定义的DCS ●目的地(控制台、打印机等) ●读取/写入别名数据以满足DCS请求 ●读取Tricon诊断显示由DCS控制 ●写保护，锁定对Tricon 控制器TDC-3000源的更改 ●同步来自DCS的主时钟.点对点通信有许多用于的Tricon控制器,每个控制器都包含一个smm-DCS，可以使用共享数据向下游Tricon发出重大过程变化 ●警报.事件序列-将Tricon事件数据传输到公共显示器或历史工作站模块记录，以帮助确定工厂跳闸的原因并增加过程的正常运行时间.霍尼韦尔网络不间断的热备盘功能 The 4409 Safety Manager Module (SMM) serves as the interface between the Tricon controller and the Honeywell Universal Control Network (UCN), which is one of the three major TDC-3000 distributed control systems. Displayed as a secure node SMMS on UCN on the Honeywell system, transmitting process information at full network data rate for use anywhere on TDC-3000. Multiple myeloma transmits Tricon alias data (including system variables) and diagnostic information to the operator workstation in a display format familiar to Honeywell carriers. The TDC-3000 provides the following functions through SMM: ● Process critical I/O points and transmit the results to DCS ● Process Tricon alarms and propagate them to user-defined DCS ● Destination (console, printer, etc.) ● Read/write alias data to meet DCS requests ● Reading Tricon diagnostic display controlled by DCS Write protect, lock changes to Tricon controller TDC-3000 source Synchronize the master clock from DCS. There are many Tricon controllers for point-to-point communication, each containing an SMM-DCS that can use shared data to send significant process changes to downstream Tricon ● Alarm. Event sequence - Transfer Tricon event data to a public display or historical workstation module for recording, to help determine the cause of factory trips and increase process uptime. Honeywell network's uninterrupted hot backup function
扫一扫咨询微信客服
