欢迎访问厦门雄霸电子商务有限公司(漳州分公司)官网!

全国咨询热线

18059884797

产品中心
您的位置:首页 >> 产品展示 >> TERICONEX

TRICONEX 3807 双极模拟输出模块 典型值诊断指标模块状态通过

品牌:TRICONEX

型号:3807

名称:双极模拟输出模块

质保:一年
联系电话:18059884797

详细介绍


3807  双极模拟输出模块

型号3807TMR标牌,AO输出电流范围-60至60毫安4双极性输出的点数孤分无,庶人归,DC归分辨率13位输出精度%3C 0.25%(范围为-60至60安)满量程范围(FSR),从0至60摄氏度。FSR= 120毫安。外部环路电源24 VDC- 15%/+ 20%,+5%纹波(反向电压保护)输出环路功率要求与负载(欧姆)无关;对于60mA,大负载为150欧姆,与外部回路电源电压的变化无关。250,500,750,1000超量程保护+36 VDC,连续分支故障时的切换时间%3C 10 ms,典型值诊断指标模块状态通过、故障、活动、(每个模块一个)负载, PWR1, PWR2颜色代码浅绿色制造商:TRICONEX,美国制造
TRICONEX   3807  双极模拟输出模块     典型值诊断指标模块状态通过
Model 3807TMR label, AO output current range -60 to 60 milliamperes, 4 bipolar output points with no isolated points, common people return, DC return resolution 13 bit output accuracy% 3C 0.25% (range -60 to 60 amperes) Full scale range (FSR), from 0 to 60 degrees Celsius. FSR=120 mA. External loop power supply 24 VDC -15%/+20%,+5% ripple (reverse voltage protection) output loop power requirements are independent of the load (ohms); For 60mA, the high load is 150 ohms and is independent of changes in external circuit power supply voltage. 2505007501000 over range protection+36 VDC, switching time during continuous branch failure% 3C 10 ms, typical diagnostic indicators module status pass, fault, active, (one per module) load, PWR1, PWR2 color code light green Manufacturer: TRICONEX, manufactured in the United States
TRICONEX   3807  双极模拟输出模块     典型值诊断指标模块状态通过

Copyright © 2022 厦门雄霸电子商务有限公司漳州分公司 All Rights Reserved. 闽ICP备20016028号

厦门雄霸电子商务有限公司(漳州分公司)扫一扫咨询微信客服
厦门雄霸:何姗姗
Baidu
map