IS200TSVCH2ADC MRP061873 电路板组件is 200 vtc CCH 1 c是GE公司制造的电路板组件,是Mark VI系统的一部分。 MKVI是燃 气和蒸汽轮机管理Speedtronic系列的一部分,该系列始于20世纪60年代的Mark I,并通过Mark VI和Mark Vle延续了几十年。Mark VI有一个连接到操作员界面的中央控制模块。 该操作员界面允许终用户通过使用Windows平台PC构建的界面访问报警状态和系统数据。作为热电偶输入板，IS200VTCCH1 C通过TBTC和DTTC端子板等端子板接受24路热电偶输入。IS200VTCCH1C仅支持T、S. K、 J和E型热电偶。它还支持范围为-8mV至+ 45mV的mV输入。该板不支持B、N或R型热电偶，或20mV至-9mV或+ 46mV至+95mV的mV输入。如果需要这些范围,则需要一个VTCCH2板。IS200VTCCH1C内置两个背板和四个其他板连接器。这些其他连接器由导电点或导电迹线制成。这块板上的电容和电阻数以百计;这些都有编号,并带有参考标记。它还具有二极管、 电感线圈或磁珠以及TP测试点。它还具有许多集成电路,现场可编程门阵列(FieldProgrammable GataArray的缩写) s、CMOS静态RAM和数字信号处理器。前面板上安装了三个led组件，分别标记为运行(绿色LED、)故障(红色LED)和状态(橙色LED)。)
IS 200 vtc CCH 1c is a circuit board component manufactured by GE and is part of the Mark VI system. MKVI is part of the Speedtronic series for gas and steam turbine management, which began with the Mark I in the 1960s and continued through Mark VI and Mark Vle for decades. The Mark VI has a central control module connected to the operator interface. This operator interface allows end users to access alarm status and system data through an interface built using a Windows platform PC. As a thermocouple input board, IS200VTCCH1 C receives 24 thermocouple inputs through terminal boards such as TBTC and DTTC terminal boards. IS200VTCCH1C only supports T and S K. J and E type thermocouples. It also supports mV inputs ranging from -8mV to+45mV. This board does not support B, N, or R type thermocouples, or mV inputs from 20mV to -9mV or+46mV to+95mV. If these ranges are required, a VTCCH2 board is required. The IS200VTCCH1C is equipped with two backplanes and four other board connectors. These other connectors are made of conductive points or traces. There are hundreds of capacitors and resistors on this board; These are all numbered and have reference marks. It also has diodes, inductance coils or magnetic beads, and TP test points. It also features many integrated circuits, Field Programmable GateArrays (abbreviated as FieldProgrammable GateArrays), CMOS static RAM, and digital signal processors. Three LED components are installed on the front panel, labeled as running (green LED), faulty (red LED), and status (orange LED)
扫一扫咨询微信客服
