电缆组件是用来连接不同电子设备系统或分系统之间的电气连接组件，是由各种绝缘电线、屏蔽线和电连接器组成。随着电缆组件在通讯领域的广泛应用，对电缆组件电气性能的稳定性，使用寿命及耐环境要求也越来越高。目前常用的电缆组件均为两端连接器，中间电缆，电缆和连接器通过压接，装接或焊接方式连接，外套热缩套管或注塑保护。接下来让我们看下它的装接方式有哪些? 电缆组件的装接主要分三种方式: 一、直焊式:电缆内导体与连接器内导体;半刚性电缆外导体与连接器外导体锡焊连接,需要用专用装配工具。 优点: 1.连接线能好。2.焊接结构刚度大，整体性好。3.焊接方法种类多，焊接I工艺适用性广,比较容易现实。 二、压接式:电缆屏蔽层被压接套管用专用压接钳压接固定在连接器上，结构简单，装接速度快，一致性好, 可靠性高,该结构适用于柔性电缆。 优点: 1.结构简单。2.装接速度快。3.- 致性好; 4.可靠性高。 三、夹持式:装配连接器和电缆时，利用螺母结构,把电缆屏蔽层通过夹持机构与连接器外壳外导体连接并固定，该结构适用于柔性电缆与馈线电缆。 优点: 1.压铜接线端子+分便利,符合实际要求能够很容易的实现链式桥接。2.在导线接线位紧密相邻时，它能提高绝缘安全度并防止导线分叉。3.可使导线更容易插入端头。电缆组件是一种高精密的使用耗材，不正确的操作,高强度频繁的使用会缩短电缆的使用寿命，所以大家在平时使用时要注意电缆组件的常规保养。还有就是应用场合的不同连接器的安装方式也会有所不同，大家一定要分辨好。 Cable components are electrical connection components used to connect different electronic equipment systems or subsystems, consisting of various insulated wires, shielded wires, and electrical connectors. With the widespread application of cable components in the field of communication, the requirements for the electrical stability, service life, and environmental resistance of cable components are also increasing. At present, the commonly used cable components are connectors at both ends, with intermediate cables. The cables and connectors are connected through crimping, assembly, or welding, and are covered with heat shrink sleeves or injection molded for protection. Next, let's take a look at its installation methods? There are three main ways to install and connect cable components: 1、 Direct welding type: the inner conductor of the cable and the inner conductor of the connector; The soldering connection between the outer conductor of a semi rigid cable and the outer conductor of a connector requires the use of specialized assembly tools. Advantages: 1. The connection cable can be good. 2. The welding structure has high stiffness and good overall performance. 3. There are many types of welding methods, and the welding process I has wide applicability and is relatively easy to implement. 2、 Crimping type: The cable shielding layer is crimped and fixed on the connector using a special crimping pliers by crimping the sleeve. The structure is simple, fast in assembly speed, good in consistency, and high in reliability. This structure is suitable for flexible cables. Advantages: 1. Simple structure. 2. Fast assembly speed. 3. Good pathogenicity; 4. High reliability. 3、 Clamping type: When assembling connectors and cables, a nut structure is used to connect and fix the cable shielding layer to the outer conductor of the connector shell through the clamping mechanism. This structure is suitable for flexible cables and feeder cables. Advantages: 1. The copper terminal blocks are easy to connect and separate, which meets practical requirements and can easily achieve chain bridging. When the wire connection positions are closely adjacent, it can improve insulation safety and prevent wire branching. 3. It can make it easier for the wire to be inserted into the end. Cable components are high-precision consumables. Improper operation and frequent use with high intensity can shorten the service life of cables. Therefore, it is important to pay attention to the routine maintenance of cable components during daily use. Also, the installation methods of connectors in different application scenarios may vary, so it is important to distinguish them well.
扫一扫咨询微信客服
