GE    IS420UCSBH4A 控制器 此型号与以前的UCSB控制器类似

IS420UCSBH4A    控制器

控制器IS420UCSBH4A是通用电气为Mark VIe系列生产的另一种UCSB控制器。该控制器被描述为能够在 2100 MHz EP2100 英特尔处理器上运行的 EX1066e、LS80579e 和 Mark VIe 系列中工作。EP80579处理器用于帮助需要高可靠性和高速的应用。此型号与以前的UCSB控制器类似，除了上面提到的使用的处理器外，控制器都使用相同的处理器类型，但运行在不同的MHz上。

IS420UCSBH4A控制器类似于Mark VIe系列中的UCSC控制器，控制器组之间的区别在于硬件，但它们确实在控制器的优点方面有一些相似之处。该控制器的一些优点是它是单个模块，并且具有闪存，可以根据用户的需求方便地进行更新。操作此控制器所需的位置和认证与以前的型号相同，控制器可用于具有 UL E207685 和 UL DEMKO 12 ATEX 1114875X 认证的危险和非危险场所。有关位置及其所需认证的所有信息均可从第 6725 页的 GEH-112 Mark VIe/VIeS 控制设备 HazLoc 说明指南中获得。

The controller IS420UCSBH4A is another UCSB controller produced by General Electric for the Mark VIe series. This controller is described as capable of operating on the EX1066e, LS80579e, and Mark VIe series on the 2100 MHz EP2100 Intel processor. The EP80579 processor is used to assist applications that require high reliability and speed. This model is similar to previous UCSB controllers, except for the processors mentioned above, which all use the same processor type but run on different MHz.
The IS420UCSBH4A controller is similar to the UCSC controllers in the Mark VIe series. The difference between controller groups is in hardware, but they do have some similarities in the advantages of controllers. Some advantages of this controller are that it is a single module and has flash memory, which can be easily updated according to user needs. The location and certification required to operate this controller are the same as previous models, and the controller can be used in hazardous and non hazardous locations with UL E207685 and UL DEMKO 12 ATEX 1114875X certifications. All information about the location and required certification can be obtained from the GEH-112 Mark VIe/VIeS Control Equipment HazLoc Instruction Guide on page 6725.