所需信号输出类型(振动或位置)的发射机的配置测量范围是通过跨接设置。为达到较高的测量精度,将发射机中的沪深9360调整为选传感器类型和电缆长度(5 与6422米或9米电缆或5与6423米或9米电缆)一起，A6210发射器和传感器组成的测量链。改变传感器类型和/或传感器的电缆长度需要重新校准的发射机保持准确度。该测量链的特性是适用于参考材料4铬钼42,根据SAE 4140。在安装过程中，A6210调整传感器头和传感器之间的距离测量目标。传感器调整的标准是缓冲输出信号发射机。沪深9360变送器是在一个封闭的内 置弹簧DIN轨夹坚固的外壳。-个可选面板适配器可用。连接电涡流传感器与一个可插拔的柠檬在发射机前面的连接器。电流环的额定电源电压电动变送器直流24 Vzui大500Q分流。测量值缩放4-20mA输出。 The configuration measurement range of the transmitter for the required signal output type (vibration or position) is set through a crossover. To achieve high measurement accuracy, adjust the Shanghai Shenzhen 9360 in the transmitter to the selected sensor type and cable length (5 to 6422 meters or 9 meters of cable or 5 to 6423 meters or 9 meters of cable)- Starting from the measurement chain composed of A6210 transmitter and sensor. Changing the sensor type and/or cable length of the sensor requires recalibrating the transmitter to maintain accuracy. The characteristics of this measuring chain are applicable to reference material 4 chromium molybdenum 42, according to SAE 4140. During the installation process, A6210 adjusts the distance between the sensor head and the sensor to measure the target. The standard for sensor adjustment is the buffered output signal transmitter. The Shanghai Shenzhen 9360 transmitter is housed in a sturdy enclosure with built-in spring DIN rail clamps- An optional panel adapter is available. Connect the eddy current sensor to a pluggable lemon connector in front of the transmitter. The rated power supply voltage of the current loop is 24 Vzui DC with a large 500Q shunt for the electric transmitter. Scale the measured value to 4-20mA output.
扫一扫咨询微信客服
