BENTLY 3500/15 106M1079-01 交流电源模块 任何一种电源都可以为整个机架供电

3500/15 106M1079-01   交流电源模块

3500/15交流电源模块和直流电源模块为半高模块必须安装在机架左侧的指定槽位上。的3500机架可以包含一个或两个电源的任何组合交流和直流。任何一种电源都可以为整个机架供电。当机架内安装两个电源时，下方的电源插槽充当主电源，而另一个在上插槽充当备份供应。如果安装,第二个电源是备份主要的一个。拔插任何一个电源模块都不停机机架只要安装第二电源即可正常运行。 3500/15交流和直流电源接受广泛的输入电压，并将其转换为可接受的电压,以供他人使用3500模块。3500配套的电源有以下几种
系列机械保护系统:
|通用交流电源
|高压直流电源
|低压直流电源

The 3500/15 AC power module and DC power module are half height modules that must be installed in the designated slot on the left side of the rack. The 3500 rack can contain any combination of one or two power supplies, AC and DC. Any type of power supply can power the entire rack. When two power supplies are installed in the rack, the lower power slot serves as the main power supply, while the other slot serves as the backup supply. If installed, the second power supply is the primary backup. Inserting or unplugging any power module does not shut down the rack. As long as a second power supply is installed, it can operate normally. The 3500/15 AC and DC power supplies accept a wide range of input voltages and convert them into acceptable voltages for others to use with the 3500 module. 3500 comes with the following types of power supplies
Series of mechanical protection systems:
|Universal AC power supply
|High voltage DC power supply
|Low voltage DC power supply