146031-01 瞬态数据接口 I/O 模块 - 这 TDI 带有内置的静态数据捕获功能。但是，通道启用磁盘是一种可选设备，它使 TDI 也能记录动态和高分辨率瞬态数据。3500 机架包含 TDI 的通信处理功能。
- 3500/22M 系列瞬态数据接口将 3500 监控系统连接到本特利内华达的 System 1 机械管理软件。TDI 将 3500/20 机架接口模块的功能与 TDXnet 等通信处理器的数据收集功能相结合。
- TDI 与 M 系列监视器（3500/40M、3500/42M 等）一起在 3500 机架的 RIM 插槽中工作，以连续捕获稳态和瞬态波形数据，并通过以太网链路将其传输到主机软件。默认情况下，TDI 捕获静态数据，但安装额外的通道启用磁盘也允许您记录动态或瞬态数据。
- 除了在 3500 机架内实现通信处理器功能外， TDI 与以前的通信处理器相比，在多个领域进行了增强。
- 这 TDI 执行整个机架共享的某些功能;然而，TDI 不是关键监测通道的一部分，对整个监测系统的正确、正常性能没有影响。每个机架需要一个 TDI 或 RIM。TDI 在机架中仅占用一个插槽，并且始终处于 Slo t 1 中。（在电源旁边）。
- 3500 系统需要 TDI 的 TMR 版本，用于三重模块化冗余 （TMR） 应用。除了所有常规 TDI 功能外，TMR TDI 还执行“监控通道比较”。监控投票由 3500 TMR 配置使用监控选项中提供的布置进行。使用这种方式，TMR TDI 实时比较三个冗余监视器的输出。
- 如果 TMR 确定来自其中一个监视器的信息不再等于来自其他两个监视器的信息（在指定的百分比内），它将标记该监视器为错误，并在系统事件列表中记录事件。
This TDI comes with built-in static data capture function. However, channel enabled disks are an optional device that enables TDI to also record dynamic and high-resolution transient data. The 3500 rack contains communication processing functions for TDI.
The 3500/22M series transient data interface connects the 3500 monitoring system to Bently Nevada's System 1 mechanical management software. TDI combines the functions of the 3500/20 rack interface module with the data collection functions of communication processors such as TDXnet.
TDI works together with M-series monitors (3500/40M, 3500/42M, etc.) in the RIM slot of the 3500 rack to continuously capture steady-state and transient waveform data, and transmit it to the host software through an Ethernet link. By default, TDI captures static data, but installing additional channel enabled disks also allows you to record dynamic or transient data.
In addition to implementing communication processor functionality within a 3500 rack, TDI has been enhanced in multiple areas compared to previous communication processors.
This TDI performs certain functions shared across the entire rack; However, TDI is not a part of the critical monitoring channel and has no impact on the correct and normal performance of the entire monitoring system. Each rack requires a TDI or RIM. TDI only occupies one slot in the rack and is always in Slot 1. (next to the power supply).
The 3500 system requires the TMR version of TDI for Triple Modular Redundancy (TMR) applications. In addition to all conventional TDI functions, TMR TDI also performs "monitoring channel comparison". The monitoring voting is carried out using the arrangements provided in the monitoring options in the 3500 TMR configuration. Using this method, TMR TDI compares the outputs of three redundant monitors in real-time.
If TMR determines that the information from one monitor is no longer equal to the information from the other two monitors (within the specified percentage), it will mark that monitor as an error and record the event in the system event list.
Analog Input Card: 16 Channels 4-20 mA, HART, AI 16-Channel Terminal Block
Analog Input Card: 8 Channels 4-20 mA, HART, I/O Terminal Block
LS AI 模块 4-20mA；RTD-SS4303T03
Discrete Input Card; 32 Channels; 24 Vdc; Dry Contact; 32-Channel I/O Termination Block
Discrete Output Card 32 Channels 24 Vdc; High Side; I/O Termination Bloc
Analog Input Card: 8 Channels RTD, RTD Terminal Block
LS AI 模块 4-20mA；2W/4W-SS4303T01
LS AI模块 电偶；mV 带端子座-SS4303T52
AI 模块 4-20mA；2W/4W-SE4303T01
AI模块 电偶；mV 带端子座-SE4303T52
LS DI 24-SS4301T02
LS DO 24 DTA-SS4302T01
AI 模块 4-20mA；RTD-SE4303T03
AO模块-SE4304T01
LS DO 24 ETA-SS4302T02
System Power Supply, 24 Vdc Input
DI ISOL模块-SE4301T07
DO模块24VDC HIGH-SIDE-SE4302T01
DO继电器模块-SE4302T51
DI DRY模块-SE4301T02
DO ISOL模块-SE4302T02
24V,80A
输入220VAC,输出24VDC,40A
LS AI CHARM ；RTD-SS4303T03
8宽底板-卡件，带扩展线缆
LS AI CHARM 4-20mA；HART-SS4303T01
8宽底板-卡件
LS DO CHARM;24VDC DTA-SS4302T01
DO CHARM;24VDC ISOLATED-SE4302T02
AI CHARM 4-20mA；HART-SE4303T01
AI CHARM ；RTD-SE4303T03
LS DO CHARM;24VDC ETA-SS4302T02
DO CHARM;24VDC HIGH-SIDE-SE4302T01
LS DI CHARM;24VDC LOW-SIDE(DRY CONTACT)-SS4301T02
SX Controller电源模块 型号:SX控制器电源-SE5009; 输入电压:220V; 输出电压:24V; 容量:20A; 原制造厂家:EMERSON
DI CHARM;24VDC LOW-SIDE-SE4301T02
扫一扫咨询微信客服
