ABB DSQC652 数字信号板具有16个数字量输入端口和16个数字量输出端口

品牌：ABB

型号：DSQC652

名称：数字信号板

质保：一年

联系电话：18059884797

详细介绍

DSQC652 数字信号板

ABB DSQC652是一款数字信号板，具有16个数字量输入端口和16个数字量输出端口。它可以通过PCI-E插槽挂载在DeviceNet总线下。

在使用ABB DSQC652之前，需要确认这块板子在挂在总线下的地址，这可以通过控制面板的配置窗口进行设定。在信号选型里面添加输入信号，设置Device mapping（驱动映射），然后重启电脑。

每个接线端子有10个接线柱。对于信号输出X1和X2而言，1~8号为输出通道，9号为0V，10号为24V+；对于信号输入X3和X4而言，1~8号为输入通道，9号为0V，10号未使用。

在X1和X2的上方，有两排LED指示灯，每排八个，代表八个通道。当信号输出时，相应的LED指示灯会亮起。

ABB DSQC652 数字信号板具有16个数字量输入端口和16个数字量输出端口
ABB DSQC652 is a digital signal board with 16 digital input ports and 16 digital output ports. It can be mounted on the DeviceNet bus through the PCI-E slot.
Before using ABB DSQC652, it is necessary to confirm the address of this board hanging under the bus, which can be set through the configuration window of the control panel. Add input signals to the signal selection, set Device mapping, and then restart the computer.
Each wiring terminal has 10 terminals. For signal outputs X1 and X2, numbers 1-8 are output channels, number 9 is 0V, and number 10 is 24V+; For signal inputs X3 and X4, numbers 1-8 are input channels, number 9 is 0V, and number 10 is not used.
Above X1 and X2, there are two rows of LED indicator lights, with eight in each row, representing eight channels. When the signal is output, the corresponding LED indicator light will light up.
ABB DSQC652 数字信号板具有16个数字量输入端口和16个数字量输出端口