SCHNEIDER 140CPS51100 电源模块 能够处理控制系统内各种设备的功率需求

140CPS51100     电源模块

在输入电压方面，140CPS51100 模块要求输入电压为 125 V DC，范围为 100 至 150 V。它在 400 V 时的额定输入电流为 125 mA，能够处理控制系统内各种设备的功率需求。该模块具有浪涌电流保护功能，额定浪涌电流额定值为 10 A。这种保护机制有助于防止上电期间出现过大的电流浪涌，从而确保所连接设备的安全性和使用寿命。140CPS51100 模块的一个显著特点是其快速输入电源中断响应时间，指定小于或等于 1 ms。这种快速响应时间有助于将电源中断的影响降至低，并确保控制系统不间断运行，即使在短暂的电源干扰期间也是如此。此外，该模块的保险丝额定值为 0.75 A，可进一步防止电流过载和短路。Modicon 140CPS51100 模块提供 5.1 V DC 的稳定输出电压。这种的电压调节可确保连接的设备在指定的电压范围内接收到必要的功率。在独立模式下，该模块的电源输出电流范围为 0.3 至 3 A，使其能够满足控制系统内各种设备和组件的电源要求。

In terms of input voltage, the 140CPS51100 module requires an input voltage of 125 V DC, ranging from 100 to 150 V. It has a rated input current of 125 mA at 400 V and can handle the power requirements of various devices within the control system. This module has surge current protection function, with a rated surge current of 10 A. This protection mechanism helps to prevent excessive current surges during power on, thereby ensuring the safety and service life of the connected devices. A notable feature of the 140CPS51100 module is its fast input power interruption response time, specified to be less than or equal to 1 ms. This fast response time helps to minimize the impact of power outages and ensure uninterrupted operation of the control system, even during brief power disturbances. In addition, the rated value of the fuse in this module is 0.75 A, which can further prevent current overload and short circuit. The Modicon 140CPS51100 module provides a stable output voltage of 5.1 V DC. This precise voltage regulation ensures that the connected devices receive the necessary power within the specified voltage range. In independent mode, the power output current range of this module is 0.3 to 3 A, enabling it to meet the power requirements of various devices and components within the control system.

P0973JM (A4-Series) 24-Port Copper managed switch with two RJ-45 uplink ports and two ports
for Mini-GBIC modules.
P0973JN (A4-Series) 24-Port Fiber managed switch with two RJ-45 uplink ports and two ports for
Mini-GBIC modules.
P0973JP (A4-Series) 8-Port Copper/ 8-Port Fiber managed switch with two RJ-45 uplink ports and
two ports for Mini-GBIC modules.
P0973KJ (C-Series) 26-Gigabit (SFP(a)) Port managed switch provides up to twenty-six 1Gb
copper/fiber uplinks (ISL) or alternatively, a combination of Gigabit and 100Mb ports with up to
twenty-four 100Mb end device fiber connections using the 100Base-FX Mini-GBIC (P0973JE).
P0973LK (B-Series) 24-Gigabit (RJ-45) Port managed switch provides up to twenty-four
10/100/1000Base-TX Gigabit ports. Four SFP(a) ports can be populated with 1000Base-X MiniGBIC uplink (ISL) connector modules.
P0973LN (SSA S180 Chassis managed switch) with standalone power supply (P0973LQ), each
with 48-port 1000Base-X 1 Gb SFP uplink ports and four SFP+ ports configurable as 1 Gb uplink
ports or alternatively, a combination of Gigabit and 100Mb ports with up to forty-eight 100Mb end
device fiber connections using the 100Base-FX Mini-GBIC (P0973JE).
P0973KD (S4 Chassis managed switch) with up to 168 1 Gb SFP uplink ports, configured as fiber
or copper uplinks or alternatively, a combination of Gigabit and 100Mb ports with up to 166 100Mb
end device fiber connections using the 100Base-FX Mini-GBIC (P0973JE).
RH102AB (X460-G2 managed switch) provides 24 modular 1000Base-X Gigabit (SFP) ports,