1C697CPX935 GE 基于VME C.1标准格式

1C697CPX935是指GE（通用电气）自动化和控制公司制造的IC697CPX935 CPU模块。这款模块是单槽PLC CPU，具有三个内置串行端口，能够对系统进行实时控制。

IC697CPX935模块基于VME C.1标准格式，通过机架上的背板与不同的“智能选项”模块进行通信。它支持多种模块，包括整个IC697系列的离散和模拟I/O模块、可编程和字母数字显示协处理器、IC660和IC661总线控制器模块、链路和LAN接口模块以及通信模块。

此外，IC697CPX935模块具有以下特点：

96MHz微处理器，允许每0.4微秒执行一次浮点计算。
支持高达12K的I/O和高达8K的模拟I/O的任何混合。
通过三位运行/停止控制开关或连接到运行适当软件的计算机进行操作。
1mbyte的电池支持内存，包含256K的非易失性用户闪存。
支持BMA（可能在7.92及更高版本中）。
可由MS-DOS或基于Windows的编程软件进行编程和配置。
支持通过以太网的Windows 95或Windows NT TCP/IP或通过SNP端口的通信。
具有可配置的数据和程序内存，带电池的日历钟。
具有三位置操作模式开关和密码控制访问功能。
支持远程程序员键盘开关和内存保护。
有7个状态LED用于软件配置（无拨码开关或跳投）。
系统内可升级固件。

 f1C697CPX935 refers to the IC697CPX935 CPU module manufactured by GE (General Electric) Automation and Control. This module is a single-slot PLC CPU with three built-in serial ports for real-time control of the system.

The IC697CPX935 module is based on the VME C.1 standard format and communicates with the different "Smart Options" modules via a backplane on the rack. It supports a variety of modules, including discrete and analog I/O modules for the entire IC697 family, programmable and alphanumeric display coprocessors, IC660 and IC661 bus controller modules, link and LAN interface modules, and communication modules.

In addition, the IC697CPX935 module has the following features:

96MHz microprocessor that allows floating-point calculations to be performed every 0.4 microseconds.
Supports any mix of I/O up to 12K and analog I/O up to 8K.
Operate via a three-position run/stop control switch or connected to a computer running the appropriate software.
The 1mbyte battery supports memory and contains 256K of non-volatile user flash memory.
Support for BMA (possibly in 7.92 and later).
It can be programmed and configured by MS-DOS or Windows-based programming software.
Supports communication over Ethernet over Windows 95 or Windows NT TCP/IP or over SNP ports.
Calendar clock with configurable data and program memory, with battery.
It has three position operation mode switch and password control access function.
Support remote programmer keyboard switch and memory protection.
There are 7 status leds for software configuration (no dip switches or jump shots).
Firmware can be upgraded in the system.