1997年由ABB公司提出。IGCT使变流装置在功率、可靠性、 开关速度、效率、成本、重量和体积等方面都取得了巨大进展,给电力电子成套装置带来了新的飞跃。IGCT是将GTO芯片与反并联二极管和门极驱动电路集成在-起,再与其门极驱动器在外围以低电感方式连接,结合了晶体管的稳定关断能力和晶闸管低通态损耗的优点,在导通阶段发挥晶闸管的性能,关断阶段呈现晶体管的特性。IGCT 具有电流大、阻断电压高、开关频率高、可靠性高、结构紧凑、低导通损耗等特点,而且造成本低,成品率高,有很好的应用前景。己用于电力系统电网装置(100MVA) 和的中功率I业驱动装置(5MW)IGCT在中压变频器领域内成功的应用了11年.的时间(到09年为止), 由于IGCT的高速开关能力无需缓冲电路,因而所需的功率元件数目更少,运行的可靠性大大增高。IGCT集IGBT (绝缘门极双极性晶体管)的高速开关特性和GTO (门极关断品闸管)的高阻断电压和低导通损耗特性于一体,一般触发信号通过光纤传输到IGCT单元。在ACS6000的有缘整流单元的相模块里,每相模块由IGCT和二极管、钳位电容组成,由独立的[ ]极供电单元GUSP为其提供能源。
It was proposed by ABB in 1997. IGCT has made great progress in power, reliability, switching speed, efficiency, cost, weight and volume, and has brought a new leap to power electronic complete sets. IGCT is to integrate the GTO chip with the anti-parallel diode and gate drive circuit at the beginning, and then connect it with the gate driver in a low inductance mode at the periphery, combining the stable turn-off ability of the transistor and the advantages of the low on-state loss of the thyristor, to play the performance of the thyristor in the on-stage, and to show the characteristics of the transistor in the off-stage. IGCT has the characteristics of large current, high blocking voltage, high switching frequency, high reliability, compact structure, low on-off loss and so on, and has a good application prospect. The IGCT, which has been used in power system grid device (100MVA) and medium power I drive device (5MW), has been successfully applied in the field of medium voltage inverter for 11 years. Due to the high speed switching capability of IGCT without buffer circuit, the number of power components required is less, and the reliability of operation is greatly increased. The IGCT combines the high-speed switching characteristics of the IGBT (insulated gate bipolar transistor) with the high blocking voltage and low on-loss characteristics of the GTO (gate shutdown gate tube), and the trigger signal is generally transmitted to the IGCT unit through the optical fiber. In the phase module of the ACS6000's marginal rectifier unit, each phase module consists of an IGCT and a diode, a clamp capacitor, and is powered by an independent [] pole power supply unit GUSP.
其他型号推荐:
HDS02.2-W040N-HS12-01-FW力士乐驱动器控制器 | 1769-OF8V Allen-Bradley可编程控制器模块 |
hds3.3.2 - w100n - hs32 -01- fw力士乐驱动器控制器 | 横河AAI141模拟输入模块 |
hds3.3.2 - w100n - ht01 -01- fw力士乐驱动器控制器 | 330103-00-04-10-02-05 Bently Nevada 3300 XL 8毫米接近探头 |
HDS04.2-W200N-HT01-01-FW力士乐驱动器控制器 | Allen-Bradley Kinetix 5700双轴伺服驱动器 |
HDS04.2-W200N-HS32-01-FW力士乐驱动器控制器 | Allen-Bradley集成轴模块 |
HDS05.2-W300N-HT46-01-FW力士乐驱动器控制器 | 1756-OF8A艾伦布拉德利模拟输出模块 |
140no78000施耐德以太网DIO网络模块 | 1756-IF8A Allen-Bradley 8通道电压/电流输入 |
1756-OF6CI艾伦-布拉德利隔离模拟输出模块与电流回路 | 1606-XLB240E艾伦-布拉德利基本开关模式电源 |
MPL- b890c - mj74aa艾伦布拉德利MPL系列低惯量旋转伺服电机 | 5069- l306er Allen-Bradley八(8)5069 I/O模块 |
Allen-Bradley双轴Kinetix伺服驱动器 | 16(16)直流输出通道 |
1769-IF4XOF2艾伦布拉德利紧凑型I/O模块 | 1788-EN2DNR Allen-Bradley以太网I/P到DeviceNet连接设备 |
Copyright © 2022 厦门雄霸电子商务有限公司漳州分公司 All Rights Reserved. 闽ICP备20016028号