IC697CPX935是90-30系列中央处理器(CPU)。该控制器是一个单槽CPU模块，带有三(3)个串行端口用于通信。具体来说，它有1个RS232串口和2个9针d壳RS485接口。这些端口支持SNP Slave、Break-Free SNP Slave。所有端口都支持SNP slave，而Break-Free SNP slave仅对Port1和Port 2有效。
IC697CPX935还配备了96 MHz, 80486DX4微处理器，布尔执行速度为0.4微秒，它具有集成的1MB电池支持的随机存取存储器(RAM)和256 KB非易失性闪存。该控制器可容纳12K位离散输入和输出数据。对于模拟输入和输出，控制器有8K字的内存分配。这使得控制器能够在大型应用程序中使用，因为它能够提供I/O容量。
建议将IC697CPX935安装在不超过50℃的环境中。该CPU需要使用强制风冷风扇散热，以保证CPU温度不受限制。冷却风扇组件可用于此CPU，如机架风扇组件额定电压120 VAC (IC697ACC721);工作电压240 VAC的机架式风机组件(IC697ACC724);机架风扇组件在24 VDC与目录编号IC697ACC744。
该CPU与使用MS-DOS或Windows编程软件开发的用户程序一起下载。除了标准的I/O和可选模块外，该CPU还支持通过支持VME C.1的机架式背板与I/O和智能可选模块进行通信。
GE Fanuc IC697CPX935 CPU是GE Fanuc生产的单槽PLC CPU，是GE Intelligent Platforms/GE Fanuc PLC Series 90-70产品线的一部分。该模块带有3个内置串口，可以对系统进行实时控制。IC697CPX935 CPU通过安装在背板上的机架与各种智能选件模块通信，采用VMEC.1格式。CPU通过软件连接到计算机或使用3位运行和停止控制开关运行。它还配备了一个96兆赫的微处理器，使设备能够每0.4微秒进行一次浮点计算。IC697CPX935 CPU支持12,000个输入输出和多达8000个模拟输入输出的任意组合。
GE Fanuc IC697CPX935 CPU支持GE IC697系列模块，模拟和离散I/O模块，字母数字和可编程显示处理器。支持通信模块、GE IC660和IC661总线控制器、链路或局域网接口模块。IC697CPX935单槽PLC CPU有1mb内存，由IC697ACC701电池备份。它还配备了约256 KB的闪存，用于存储用户数据。本设备的闪存用于存储系统固件。本设备的用户在升级固件时不需要拆卸本设备或更换EPROM。GE发那科IC697CPX935的CPU配置需要连接一台运行Windows NT或Windows 95操作系统的应用软件或MS-DOS的计算机。
The IC697CPX935 is a Series 90-30 Central Processing Unit (CPU). This controller is a single slot CPU module that comes with Three (3) serial ports for communication. Specifically, it has One (1) RS232 Serial port and Two (2) 9-pin D-shell RS485 interfaces. These ports support SNP Slave, Break-Free SNP Slave. SNP slave is supported by all ports while Break-Free SNP slave is available only to Port1 and Port 2.
The IC697CPX935 is also provided with a 96 MHz, 80486DX4 microprocessor with Boolean execution speed of 0.4 microseconds, It has an integrated 1MB battery-backed Random Access Memory (RAM) and 256 KB non-volatile flash memory. This controller accommodates 12K bits of Discrete input and output data. For analog Input and output, the controller has 8K Words memory allocation. This enables the controller to be used in large applications due to the I/O capacity it is capable of.
The IC697CPX935 must be installed in an environment not exceeding 50 Degree Celsius. This CPU requires use of a Forced air-cooling fan to maintain the temperature with limits. Cooling fan assemblies may be used with this CPU such as Rack Fan Assembly with voltage rating 120 VAC (IC697ACC721); Rack Fan Assembly with operating voltage of 240 VAC (IC697ACC724); Rack Fan Assembly at 24 VDC with catalog number IC697ACC744.
This CPU is downloaded with user programs that is develop using the MS-DOS or Windows based programming software. Aside from standard I/O and option modules, this CPU also supports communication with I/O and smart option modules over a rack mounted backplane that supports VME C.1.
The GE Fanuc IC697CPX935 CPU is a single-slot PLC CPU manufactured by GE Fanuc as part of the GE Intelligent Platforms/GE Fanuc PLC Series 90-70 product line. This module comes with 3 built-in serial ports and it can perform the real-time control of systems. The IC697CPX935 CPU communicates with various intelligent option modules through the rack mounted on the backplane by using VMEC.1 format. The CPU runs with a connection to a computer through software or by the use of a 3-position run and stop control switch. It also comes with a 96 MHz microprocessor, which enables the device to perform floating-point calculations after every 0.4 microseconds. The IC697CPX935 CPU supports any combination of 12,000 inputs and outputs and up to 8000 analog inputs and outputs.
The GE Fanuc IC697CPX935 CPU supports modules in the GE IC697 family, analog and discrete I/O modules, and alphanumeric and programmable display processors. It also supports communication modules, GE IC660 and IC661 bus controllers, and link or LAN interface modules. The IC697CPX935 single-slot PLC CPU has 1 MB of RAM that is backed up by using the IC697ACC701 battery. It also comes with flash memory with about 256 KB of storage capacity for user data. The flash memory of this unit is used to store the system firmware. The users of this device do not need to disassemble this device or have the EPROM replaced when updating the firmware. The GE Fanuc IC697CPX935 CPU is configured by using a connected computer that runs software applications or MS-DOS in the Windows NT or Windows 95 operating systems.
厦门雄霸===用心推荐好产品===诠释真正好服务
厦门雄霸内部环境：
公司实力雄霸注册资金千万，五星级办公环境，规模上百员工
厦门雄霸专注于DCS、PLC、机器人、大型伺服四大系统领域，
主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器
公司优势：供应进口原装正品，专业停产配件
发货快，货期精准，一手货源，现货库存超过1亿
主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、、贝加莱B&R、MOTOROLA、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、易宝EPRO、PROSOFT等各大品牌
其他相关型号：GE VMIVME-7750
GE IS420UCSBH1A
GE IS220PPDAH1B
GE VMIVME-2540-000
GE IS215UCVEM06A
GE VMIVME-7807
GE IS215UCVEH2AE
GE IC697CPX928
GE DS200SIOBH1ACA
GE IS215UCVEH2AB
GE IS200TREGH1BEC
GE DS200SIOBH1ABA
通用电气公司，即美国通用电气公司（General Electric Company），简称GE。
产地：美国
我司主营各类进口工控产品，已与众多国外知名品牌生产厂商建立合作关系，国外直供，进货快且有保障减少中间环节，配备三十九位工程师为您解决更多问题
优势品牌：本特利 内华达/Bently Nevada、霍尼韦尔/Honeywell、ABB、GE Fanuc/通用电气、YOKGAWA/横河/、EMERSON/艾默生旗下（EPRO、DeltaV、OVATION、Fisher、Rosemount）、FOXBORO/福克斯波罗、HIMA/黑马、SCHNEIDER/施耐德、TRICONEX/康吉森 英维思、ICS TRIPLEX、BACHMANN/巴赫曼、WOODWARD/伍德沃德、PROSOFT/普罗索福特、FUJI/富士、SIEMENS/西门子、Allen Bradley/罗克韦尔AB等等进口品牌
DCS分布式控制系统、PLC可编程控制系统、PES系统、ESD系统冗余容错控制系统、工业机器人工控备件样样齐全
扫一扫咨询微信客服
