KOLLMORGEN 000-5-5301A 伺服驱动器 可以用来产生控制步进电机驱动器的脉冲

000-5-5301A 伺服驱动器是一款型号为全国的伺服驱动器，它具有两个脉冲输出，可以用来产生控制步进电机驱动器的脉冲。该驱动器采用功率驱动器将控制脉冲按照某种模式转换成步进电机线圈的电流，000-5-5301A产生旋转磁场，使得转子只能按固定的步数来改变它的位置。连续的脉冲序列产生与其对应的同频率步序列。如果控制频率足够高，步进电机的转动可看作一个连续的转动。

具体来说，当输入端I1.0发出"START"信号后，控制器将输出固定数目的方波脉冲，000-5-5301A使步进电机按对应的步数转动。当输入端I1.1发出"STOP"信号后，步进电机停止转动。接在输入端I1.5的方向开关位置决定电机正转或反转。

000-5-5301A servo driver is a national servo driver model with two pulse outputs that can be used to generate pulses for controlling stepper motor drivers. The driver uses a power driver to convert the control pulse into the current of the stepper motor coil in a certain mode, generating a rotating magnetic field of 000-5-5301A, so that the rotor can only change its position in a fixed number of steps. Continuous pulse sequences generate corresponding frequency step sequences. If the control frequency is high enough, the rotation of the stepper motor can be regarded as a continuous rotation.
Specifically, when the input terminal I1.0 sends a "START" signal, the controller will output a fixed number of square wave pulses, 000-5-5301A to rotate the stepper motor according to the corresponding number of steps. When the input terminal I1.1 sends a "STOP" signal, the stepper motor stops rotating. The position of the direction switch connected to input terminal I1.5 determines whether the motor rotates forward or reverse.
其他相关型号：

AKD-P00607-NBEC-0000 伺服驱动器 

BDS4A-220J-0001-605A2  伺服驱动器 

16096-08B FSA23 II  伺服驱动器 

SC904-NN-001-01  伺服驱动器 

BDS5A-206-01010-205B2-030 伺服驱动器 

SR06004-000000 伺服驱动器 

CMP1152C1E-200172 伺服电机  

R82SSNA-NP-RM-NV-02 伺服电机  

6SM 71-K 3000-G-J伺服电机  

BDS4A-206J-0001-206B21P 伺服驱动器 

AKM52H-BKCNAA01 伺服电机 

CR10560  伺服驱动器 

AKM43E-BKC2R-00 伺服电机  

S77262-NANANA  伺服驱动器 

AKM32D-GCCNDB00伺服电机 

000-5-5301A  伺服驱动器 

伺服驱动器S7246S-NANANA  

PCX/DSP-800 伺服驱动器 

B-204-A-99-056伺服电机 

R10000-2G207C 伺服驱动器 

AKM41H-EKMNEH00 伺服电机 

CE06260 伺服驱动器 

PRDR0057VPMZ-01 伺服驱动器 

6SM 56-L 3000 伺服电机